27
1-8. Tools and Fixtures
Part No.
Name
Usage/Note
J-6323-420-A
Torque screwdriver bit
Tightening screws, for M2 machine screw, for M2.6 machine
screw
J-6325-110-A
Torque screwdriver bit (M1.4)
Tightening screws, for precision M1.4, for precision M1.7
J-6325-380-A
Torque screwdriver bit (M2)
Tightening screws, for precision M2, for precision M2.6
J-6325-400-A
Torque screwdriver (3kg)
Tightening screws
J-6252-510-A
Torque screwdriver 6kg
Commercially available
Box driver (size 14mm)
Tightening nuts
7-600-042-01
Loctite 243
Preventing self-loosening of screws
Commercially available
Loctite 263
Preventing self-loosening of screws (for flat head screws of
the MI shoe)
Commercially available
Jack nut driver 3.5mm di
For 3.5 mm audio jack
1-9. Circuit Protection Parts
1-9-1. Replacing Fuses
WARNING
Fuses are essential parts for safe operation. Be sure to use the parts specified in this manual. Replacing a fuse with an
unspecified one may cause fire or electric shock.
The unit is equipped with fuses. The fuses blow if overcurrent flows in the unit due to an abnormality. In that case, turn off the main
power of the unit once, inspect inside of the unit, and then remove the cause of the overcurrent. After that, replace the defective parts.
Board Name
Ref. No.
Part No.
Rating
DC-185
F101
1-576-751-11
5 A/32 V
RE-349
F1002
1-576-328-21
8 A/ 125 V
F1003
1-576-328-21
8 A/ 125 V
F1004
1-576-328-21
8 A/ 125 V
1-10. Electrical Adjustment
For adjusting this unit, the Adjust Station and the Adjust Manual are required.
•
Adjust Station
It is the software to start up Adjust Manual for each model.
For details, refer to Installation manual supplied with the installer for the Adjust Station.
•
Adjust Manual
It is the software to adjust and check digital cameras and camcorders for service.
For details, refer to Installation manual supplied with the installer for the Adjust Manual.
Note
Be sure to install Adjust Station first.
!
!
!
!
