Copyright © 2013 - 2014 Somfy SAS. All rights reserved.
Yslo Flex RTS 2P
20
13. Checking and resetting the panels
• Check that the product is switched on.
• Briefly press the button on the RTS control point: the
swing shutter opens until it stops automatically on the
stoppers.
• Allow the swing shutter to open completely.
• Briefly press the button on the RTS control point: the
swing shutter closes completely.
The Yslo Flex RTS 2P motor does not require any end
limit setting.
14. Reversing panel priority
This step is necessary if the time delay applies to the
wrong panel.
The priority panel is the overlapping panel or the one
that opens first.
1) Place the panels in half-open position.
2) Press and hold the and buttons until the priority
panel moves back and forth
a
upon opening,
Yslo Flex RTS 2P beeps and
immediately
press and
hold the button until the panel
b
that gets priority
moves back and forth and Yslo Flex RTS 2P beeps
twice.
15. Adjusting the closing force
Recommended values depending on usage:
USAGE
PVC shutter
Aluminium shutter
Wooden shutter
Resin shutter
Max level
1
2
3
4
Yslo Flex RTS 2P is factory set to level 2. To modify it, follow the steps below:
1) Place the panels in half-open position.
2) Briefly press the and buttons on the RTS control
point at the same time and immediately press the
and buttons on the RTS control point simultaneously
until the priority panel moves back and forth.
Yslo Flex RTS 2P beeps: the motor is in programming
mode for 10 seconds.
3) Adjust the closing force using the or buttons.
- To increase the closing force, press the button.
- To decrease the closing force, press the button.
1 x beep
beep
Level 1 (min)
BEEP-BEEP
[_____]
BEEP-BEEP
[_____]
BEEP-
BEEP
[_____]
BEEP-BEEP
[_____]
BEEP-BEEP
, etc.
2 x beep
beep
Level 2
BEEP-BEEP [] BEEP-BEEP
[_____]
BEEP-BEEP [] BEEP-
BEEP
[_____]
BEEP-BEEP [] BEEP-BEEP
[___
etc.
3 x beep
beep
Level 3
BEEP-BEEP [] BEEP-BEEP [] BEEP-BEEP
[_____]
BEEP-
BEEP [] BEEP-BEEP [] BEEP-BEEP
[_____]
BEEP etc.
4 x beep
beep
Level 4 (max)
BEEP-BEEP [] BEEP-BEEP [] BEEP-BEEP [] BEEP-BEEP
[_____]
BEEP-BEEP [] BEEP-BEEP [] BEEP-BEEP [], etc.
4) Press the button until the priority panel moves back and forth: the new closing force is saved and
Yslo Flex RTS 2P beeps twice.
1
2
BIP
BIP... BIP
5 s
2 s
b
a
a
BIP
BIP... BIP
b
0.5 s
2 s
BIP
BIP... BIP