Copyright © 2013 - 2014 Somfy SAS. All rights reserved.
Yslo Flex RTS 2P
13
5) Position the electromechanical module
d
again on the bracket, aligned with the mounting holes.
Pre-fix the rails and electromechanical module
assembly. Do not lock the screws so that you can
adjust the rails if necessary.
The anchors used must be able to withstand forces of
at least 40 kg. The electromechanical module must be
fixed in at least two points.
Somfy recommends that you use screws with a
diameter of at least six millimetres.
The choice of the fixing method depends on the
nature of the support, and therefore, it will be under
your sole responsibility.
6) Pull the rails out as far as possible while keeping at least
50 mm of the rails engaged inside the electromechanical
module.
7) Fit the mechanical module
g
on the second bracket while
covering the alignment rails.
8) Mark holes for the mechanical module
g
on the motor
side.
Keep it as parallel as possible to the pencil line before
making holes.
d
g
g
