Copyright © 2013 - 2014 Somfy SAS. All rights reserved.
Yslo Flex RTS 2P
15
- Connect the motor to 230 V
50 Hz based on the information below:
d
g
230 V
50 Hz
Neutral
Blue
Phase
Brown
7. Checking the wiring
Mechanical module connector
Buzzer
Battery (+) terminal
Red
Black
Transformer
BATTERY
230 V power cable with antenna system.
8. Commissioning and saving the RTS control point
Battery operation is not possible for the first 20 operations.
You must switch on the mains supply before any operation.
Upon power-up, if Yslo Flex RTS beeps, check the battery connection.
ON
1) Press and hold the button no. 4 on the Yslo Flex RTS board
until it beeps.
The shaft of the overlapping panel makes a rotation.
2) Take the RTS control point
3) Briefly press the (PROG) button on the RTS control
point:
The shaft of the overlapping panel makes a rotation
and Yslo Flex RTS beeps twice and the control point is
saved in Yslo Flex RTS.
4) Press the ON/OFF button to turn on or turn off the control
point.
Do not press the sensitive side of the control point
against your hand to avoid triggering accidental
orders.
1
BIP
BIP... BIP
3
4
2
2 s
BIP
BIP... BIP
