Copyright © 2016 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
80-9316-2531-020 Rev 1
1
ASSA ABLOY
#7
1/4-20
Spring Power Adjustment Screw
1601 Series Only
"BC" Valve
Pinion Cap
Closer
Size
Stamp
"L"Valve
"S"Valve
Standard Components
Optional Components
4
Closer Body
Co
ver
Sleeve Nut and Bolt
Thru Bolt and Grommet Nut
Drill 9/32 thru from Closer Side
3/8 Drill other side
Drill 9/32 thru from Closer Side
3/8 Drill other Side
(Optional)
Metal
Wood
1618A Parallel
Arm Bracket
CA
UTION
CA
UTION
An Incorrectly installed or improperly adjusted
door closer can cause property damage or
personal injury. These installation instructions
should be followed to avoid the possibility of
misapplication or misadjustment.
Non Hold Open Models
Sized
(Sizes 3,4)
1603BC
1604BC
Adjustable
(Sizes 1 thru 6)
1601
Tri-Style
Installation Instructions
Non Handed Door Closer
1600 Series
Regular Arm/Top
Jamb Shoe
Main Arm
Connecting Rod
Forearm
Screw
Arm Slide
Arm Assembly
1688
Plate
NOTE:
For special applications a separate
door and frame preparation template is
packed with these instructions. Use this
instruction sheet for installation sequence
and closer adjustments only.
Doors should be hung on ball bearing or
anti-friction hinges.
A separate door stop is recommended.
Door and frame must be properly
reinforced.
Adjust closing time speed between 3 and 7
seconds from 90° to 0°.
These door closers should NOT be
installed on the exposed side (weather
side) of exterior doors.
Left Hand Door - LH
Right Hand Reverse - RHR
Right Hand Door - RH
Left Hand Reverse - LHR
Right Hand Door - RH
Left Hand Reverse - LHR
Top Jamb
Installation
See Page 5
Regular Arm
Installation
See Page 2
Parallel Arm
Installation
See Pages
3 & 4
Top Jamb
Installation
See Page 5
Right Hand Door - RH
Left Hand Reverse - LHR
Regular Arm
Installation
See Page 2
Left Hand Door - LH
Right Hand Reverse - RHR
Left Hand Door - LH
Right Hand Reverse - RHR
Parallel Arm
Installation
See Pages
3 & 4
Weaker
-
Stronger
+
Machine Screws
#7 Drill, 1/4-20 Tap
Self Drilling Screws
Wood and Metal
For Wood drill 3/16 hole
3/16" Pilot hole
required
ASSA ABLOY
