SOMFY SGS 201, Operating And Installation Manual

Page: 35 / 72

English
31
Copyright © 2013 Somfy SAS. All rights reserved.
Unlocking the motors
Unclip the unlocking mechanism, then remove the
cylinder from the gate leaf mounting bracket.
Locking the motors
Install the cylinder. Clip the unlocking mechanism
on the catch to secure it.
3
2
1
3
2 1
Press button 2 on the remote
control until the RESET
indicator light comes on.
Release button 2.
> The indicator light flashes.
3
Press button 2 on the remote
control until all the indicators
come on.
Release button 2.
> The indicator light flashes.
3
2
Press button 1 on the remote
control once.
> The RESET indicator light
flashes.
2
Press button 1 on the remote
control once.
> The RESET indicator light
flashes.
Press button 1 on the remote
control until the indicator
light flashes.
Place a memorised 2- or
4-button remote control on the
target.
1
Press button 1 on the remote
control until the indicator
light flashes.
Place a memorised 2- or
4-button remote control on
the target.
1
„
Clearing the settings
The following will be cleared: the gate leaf travel and automatic closing of the gate.
When to clear the settings?
After programming the gate leaf travel, if you change the opening position stop or if you modify the motor wiring.
In case of spurious obstacle detection because of normal wear on the gate.
„
Clearing the memorised settings and remote controls
The following will be cleared: the gate leaf travel and automatic closing of the gate and all the memorised remote controls or radio
control points.
„
Unlocking/locking the motors
When unlocking the motors, the gate may be manoeuvred manually if there is an electrical fault.