SOMFY SGS 201, Operating And Installation Manual

Page: 27 / 72

English
23
Copyright © 2013 Somfy SAS. All rights reserved.
„
Deactivating automatic closing mode
To deactivate automatic closing mode and return to sequential mode,
repeat step 1 above and briefly press button 2
on the
remote control; the indicator will go out and then flash. Press button 1 on the remote control twice.
STOP
STOP
STOP
STOP
STOP
STOP
„
Operating your gate in automatic closure mode
In automatic mode, the gate will close automatically after 30 seconds.
Movement in front of the cells when the gate is open or is in the process of opening will cause it to automatically close after 5
seconds.
If an obstacle is detected on closing, the gate stops and reopens, then closes automatically.
Opening by pressing
button 1.
You can keep the gate in the open position by pressing button 1 again, which cancels automatic closure of the gate. To close
the gate, you must press button 1 again.
Automatic closing after
30 seconds .
STOP
STOP
STOP
Pedestrian opening
„
Operating your gate in pedestrian opening mode
Stop when moving by pressing the activated button again.
Partial opening (M1 motor) by pressing the activated button.
Close by pressing the activated button again.
<0,5s
Briefly press the button to be activated on the remote control.
> The and indicator lights come on then go out. Pedestrian
opening is activated on this button.
2
Place the remote control already memorised on the target. 1
„
Activating pedestrian opening
„
Deactivating pedestrian opening
To deactivate pedestrian opening on a button, repeat the procedure for activating pedestrian opening (described above) for this
button.
Pedestrian opening can be activated on the button of a memorised 2- or 4-button remote control (see "Selecting the buttons of your
remote control" on the next page).
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP
STOP