SOMFY Elixo 500 3S RTS, Installation Instructions Manual

Page: 21 / 88

EN
Elixo 500 3S RTS
Copyright © 2015 Somfy SAS. All rights reserved
19
CLEARING THE REMOTE CONTROLS AND ALL SETTINGS
Clearing the memorised remote controls
Causes all memorised remote controls to be cleared.
7 s
C1
F0 rSt
C1
Clears the self-learning and resets the default values for all parameters.
Clearing all settings
7 s
C1
H1 - - - H0
LOCKING THE PROGRAMMING BUTTONS
The keypad must be locked to ensure the safety of the users.
Locks the programming (end limits, self-learning, parameter settings).
When the programming buttons are locked, a dot appears after the 1st digit.
Pressing the “ SET ”, “ + ”, “ - ” buttons:
- the " SET
EXWWRQPXVWEHSUHVVHG¿UVW
- the “ + ” and “ - ” buttons must be pressed simultaneously within 2 seconds.
To access the programming again, repeat this procedure.
+ +
C1
C.1
Memorising remote controls with no access to the programming interface
This operation must be carried out close to the motor.
A = "source" remote control already memorised
B = "target" remote control to be memorised
Copying the function from a Keygo RTS remote control button to a button
on a new 2- or 4-button remote control: Copying the function from a 3-button remote control to a new
3-button remote control:
B
A
A
2 s
A B
2s < 1s