20/40
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
Chronis & Soliris Smoove
[ Back to Contents ]
Interactive operating instructions
Cosmic settings
Two setting options are available:
-
DeviationTime:
the Cycle Time is activated at sunrise or sunset with a settable time diffe-
rence between -2 and +2 hours. In each case, it can be set for sunrise and sunset. The time
difference applies for all Cosmic move commands. Determine the desired difference time
and confirm.
Example: at 05h08, the sunset is activated. The timer will activate a Cycle
Time at 21h00 (see main display). If you find this time to be too early, you
can enter a difference time of +10 mins so that the Cycle Time is activated
at 21h10. The difference time will be the same for each day.
-
"Not before time" with sunrise and "Not after time" with sunset:
the Cycle Time is activated at sunrise and not before the set
time. With sunset the Cycle Times are activated not later than a
certain time. Set the desired time and confirm.
Display of next move command over Timer
When the "Prog. Timer / Cycle time x" function is set and switched on, the
next Cycle Time is displayed with Day, Time and Move command.
Example: at sunset, a move to the Intimacy position.
When the function is active, the following is displayed.
Example: Friday at 20h00, DOWN command.
Cosmic settings
Deviation time
Not before time
00
h
:
10
m
Deviation time
21
h
:
00
m
Not after time
09:03
Fri.
Pos.
16:30
Fri.
20:00
7. SETTINGS MENU
