background image

2/40

Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images

Chronis & Soliris Smoove

[ Back to Contents ]

Interactive operating instructions

Thank you for choosing this Somfy product.

Simply elegant

Somfy is proud to present you two new ranges of touch-sensitive buttons, wired, automatic controls 
with timeless and sleek design.

Chronis Smoove Uno and IB+ range:

Time is controlled thanks to these programmable clocks for automatic opening/closing of motorized 
equipment (roller shutters, external venetian blinds, external blinds). These controls can be used in 
3 ways: in manual mode, in automatic mode, or in simulated presence mode.
The Chronis Smoove UNO S and Chronis Smoove IB+ can be associated with an io homecontrol® sun 
sensor.

Soliris Smoove Uno and IB+ range:

Climate is controlled thanks to an automated system for opening/closing the motorized equipment 
(patio awnings, interior blinds, roller shutters, external venetian blinds, external blinds) depending on 
sunlight or outdoor weather conditions (wind/rain). These controls can be used in 3 ways: in manual 
mode, in automatic mode, or in simulated presence mode. 
The Soliris Smoove UNO and Soliris Smoove IB+ can be associated with an io homecontrol® sun 
sensor and also wired sensors (sun/light, rain, wind sensors).

The UNO versions

 are dedicated to control one motor.

The IB+ versions

 are dedicated to IB+ motor controller devices (1 to 3 channels).

Interactive operating instructions

This full manual describes the operating instructions to make the best use of the 5 products of the 
new Chronis & Soliris Smoove ranges: 

•  Chronis Smoove UNO
•  Chronis Smoove UNO S
•  Chronis Smoove IB+
•  Soliris Smoove UNO
•  Soliris Smoove IB+

To find the common or specific functions of each product, consult the following table 

Functions of the 

5 products

 : available functions of each product are indicated by a small icon.

The table of Contents

 presents all instructions for the 5 products. When a chapter describes a 

function that does not apply to all products, the concerned products are indicated in the heading of 
the chapter.

This manual is interactive

•  Click on each title or page number in the table of Contents to access it directly. 
•  Click on 

[ Back to Contents ]

 at the bottom of each page to return to table of Contents.

WELCOME PAGE

Summary of Contents for Chronis Smoove Series









































Reviews: