21/40
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
Chronis & Soliris Smoove
[ Back to Contents ]
Interactive operating instructions
7.2. Sun Function
Note:
Only for Chronis S and Soliris.
The Sun Function is a comfort function: it stops the sun glaring and the heating up of the room in
summer.
As soon as the measured sun value exceeds the set threshold value for at least 3 continuous minutes,
the end products move to the predefined position.
When the threshold value is not exceeded for at least 15 continuous minutes, the Sun Function is
deactivated and the end products move to the upper end position.
For test purposes, the delay times can be shortened (see "
Configuration in Professional Operating
Mode
").
• Under "Configuration menu", select "Sun function".
> If you have already selected a sensor at start-up, these setting
options are displayed.
> If you have selected "No sensor" at start-up, you will be guided automatically to Sensor
configuration (see "
Configuration of the Sun Sensor
").
Switching ON/OFF
You can switch the function "ON" or "OFF".
1. Select "ON or "OFF" to switch on or off the function.
2. Confirm your selection.
Note:
In the factory state, the Sun Function is switched off.
Configuration menu
Prog. timer
Sun Function
Sun Function
ON/OFF
Threshold
Sun Function
Actual level
Position
Sun Function
Position
Configuration
Sun sensor ON/OFF
OFF
ON
7. SETTINGS MENU
