37/40
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
Chronis & Soliris Smoove
[ Back to Contents ]
Interactive operating instructions
7.7. Additional functions in Expert Mode
Expert Mode enables access to the special functions and is used only in exceptional cases.
• In the main menu, press the "Back" button for more than 7 seconds.
> A message appears: "You have switched on the Expert Mode".
> As soon as the device goes in Stand-By Mode, you leave the Expert Mode.
Under "Configuration Menu " / "Configuration", you can set additionally the functions "Start delay" and
"Max. tilting time".
Start delay
With electronic motors, the electrical current does not often immediately
set off a mechanical move (wake-up time). Depending on the manufacturer,
this time can vary between 0.3 and 0.7 secs. With Somfy WT motors, this
time is set generally 0.3 secs.
1. Confirm this function.
2. Set the value between 0.0 and 2.5 secs.
3. Confirm the value.
Max. tilting time (with Venetian blinds)
With Venetian blinds, in addition to the runtime of the end products, the
tilting time of the slats is set. The tilting time is the time the slats require
for a maximum move before the blinds begin to move upwards. This time
consists usually of between 0.8 to 2.0 secs and is dependent on type of
blinds and motor manufacturer.
1. Confirm this function.
2. Set the value between 0.0 and 3.0 seconds.
3. Confirm the value.
Configuration
Start delay
Producttyp setup
Configuration
Max. tilting time
Producttyp setup
0.1
s
Start delay
3.0
s
Max. tilting time
7. SETTINGS MENU
