9/40
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
Chronis & Soliris Smoove
[ Back to Contents ]
Interactive operating instructions
4. STARTING UP
4.4. Runtime setup
Runtime is the time a roller shutter, Venetian blind or awning requires for a complete move from
moved-in position to moved-out position. Runtime is also dependent on the height of the end products
and is a decisive factor for the correct moving to the intermediate positions (e.g. my-position, glare
protection and sun protection).
To set runtime, there are two possibilities available: manual or automatic.
Manual
Time can be set only when runtime of an end product has been determined (e.g. timed with a
stopwatch).
1. First set the minutes, up to 5, and confirm.
2. Then set the seconds and confirm .
Automatic
When runtime of the product is unknown, this can be set automatically.
Move end products upwards
The end products must be in the top-end position. This position is given as a reference point for the
exact positioning of the end products in "my" Position, glare protection or in sun protection position.
1. With the DOWN arrow, select "Start".
> The end products move up.
2. When they have reached the top, select "Stop".
Setting up Runtime
1. With the soft key, select "ok/menu".
2. With the DOWN arrow, select "Start".
> The end products move down.
3. When the end products have reached the bottom, confirm with
"ok/menu".
Runtime setup
Manual
Automatic
00
m
:15
s
Manual runtime setup
Move product up
Stop
Start
Auto runtime setup
Stop
Start
