17/40
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
Chronis & Soliris Smoove
[ Back to Contents ]
Interactive operating instructions
7. SETTINGS MENU
Configuration of Cycle Times
The Cycle Times are defined with the Position, Day, Time (Time or
depending on Sunrise/sunset).
Go to the "Configuration" sub menu. You will be guided to the next step.
Position
Select the required position of the end products on the timer between the
following possibilities and confirm the position.
-
Up (top), Down (bottom)
-
Glare protection (not with Chronis Smoove Uno): mostly used in
connection with sun automatism
-
Intimacy (not with Chronis Smoove Uno): mostly evenings when
one does not wish to be seen
-
my Position: a position freely definable by the user, also acces-
sible over the my soft key
-
Position 2 (not with Chronis Smoove Uno): a second position
definable by the user
The Glare protection and Intimacy positions are programmed with preset values but they can also be
changed (see "
Configuration of Cycle Times
").
Glare protection
Intimacy
Roller shutters
70%
90%
Venetian blinds
100%, angle 0.5s
100%, angle 0s
Awnings
100%
100%
Note for Venetian blinds operation:
100% position means that the Venetian blinds move completely downwards.
Angle 0.5s means that the blinds, after moving downwards, move again upwards for 0.5 seconds and
thus tilt out the slats.
Cycle Time 1
ON/OFF Cycle Time
Configuration
Cycle Time 1
Up
Down
Cycle Time 1
Glare protection
Intimacy
Cycle Time 1
my Position
Position 2
