Somerdata AROW Series Additional Instructions For Installation And Operation Download Page 13

Page: 13 / 82

AROW Series

Data Diode

Installation and Operation

3-2

Remove the unit from all packaging. Locate the accessories pack,
Gigabit Ethernet SFP (

mall

orm-factor

luggable) modules and the

power supply cable.

Physical Installation

The unit is designed to fit in a 19

” rack enclosure with M6 (supplied),

10-32UNF or 12-24UNC fasteners to attach the unit to the rack. Note
that the unit is NOT self-supporting and may require additional
bracing or tray support in some vibration environments. It should be
removed from the rack for transportation.

Using the screws and washers supplied in the accessories bag and a
large flat head screwdriver, screw the unit into your rack.

Connections

Fit SFP modules

The Gigabit Ethernet SFP modules have been packaged separately for
transport. Push each SFP modules into the SFP cages, until it clicks into
place.

Summary of Contents for AROW Series



















































































Search results

Summary of Contents for AROW Series

Reviews:

Related manuals for AROW Series

Brands by name

Popular brands

Somerdata AROW Series, Additional Instructions For Installation And Operation

Search results

Summary of Contents for AROW Series

Reviews:

Related manuals for AROW Series

Brands by name

Popular brands