Somerdata AROW Series Additional Instructions For Installation And Operation Download Page 75

Page: 75 / 82

AROW Series

Data Diode

Installation and Operation

13-2

SomerData will repair or replace, at its option, any product purchased
from SomerData which, under normal conditions of use and service,
proves to be defective in material or workmanship.

No charge will be made for labour or parts with respect to defects
covered by this warranty, provided that the work is done by
SomerData.

This warranty does not cover expenses incurred in the removal or
reinstallation of any SomerData products, whether or not proven
defective

Replacement or repairs furnished under this warranty are subject to
the same terms and conditions of the original warranty.

Summary of Contents for AROW Series



















































































Search results

Summary of Contents for AROW Series

Reviews:

Related manuals for AROW Series

Brands by name

Popular brands

Somerdata AROW Series, Additional Instructions For Installation And Operation

Search results

Summary of Contents for AROW Series

Reviews:

Related manuals for AROW Series

Brands by name

Popular brands