Solwise SAR715PVW ADSL Ethernet Router User’s Guide
Chapter
6
. VPN Configuration
89
1
Log in to your Web Configuration tool. From the left frame, click
Configuration
and then click the
IPSEC
link. Set your Negotiation ID.
• For Aggressive Mode use a string like
remote@ Pheenet.com
or
• For Main Mode use the WAN IP address of your Branch Office
(remote) VPN router
(our example shows a setup in Aggressive Mode)
2
Next enter the Intranet address. The Intranet address will tell the
remote gateway the IP address of the network the local gateway is
protecting.
3
Now enter the Intranet subnet mask. The Intranet subnet mask
will specify the size of the network it is protecting. A setting of
255.255.255.0 will indicate a Class C network. In our example, we
use the Intranet address 192.168.1.0 and a subnet mask of
255.255.255.0.
4
Now click on Add Endpoint to add information regarding the
target site. A page will load regarding tunnel settings. Fill out all the
required fields. The list below provides details about each field.
