Chapter
4
. Quick Router configuration using your browser
Solwise SAR715PVW ADSL Ethernet Router User’s Guide
40
For a proper connection the IP Address at the top of the page must
be shown; 0.0.0.0 means the router is not logged in with the ISP.
Under the ‘PPPoA parameters’ the Status should show open for IP.
Now your connection should be up and working (check your TCP
set-up is set for the new address of the router – 192.168.0.1 - and
your other TCP settings are correct).
If you’re router is not connection to your ISP then please go through
the trouble shooting section later in this manual.
4.2.7 Enabling the Wireless Interface
Before you can start to wirelessly connect to the router you need to
setup the wireless interface on the router.
To configure the wireless parameters click on 802.11b/Attributes…