Chapter
7
. How to…
Solwise SAR715PVW ADSL Ethernet Router User’s Guide
124
Now you need to do two things: Set up a port filter on port 80 (as
used for web access) and next setup your host as 192.168.0.5 for
this policy.
So, first, to create a port filter… Click on Port Filters….
Now decide if you need a filter on TCP, UDP or a filter to act upon
any IP packet (Raw IP).
For our example of blocking web access for our host on
192.168.0.5 you need to add a TCP filter. So, click on ‘Add TCP
Filter’…
Now enter port number 80 for the start and end values, then select
‘Block’ for both inbound and outbound traffic. Finally click on Apply.
