Solwise SAR715PVW ADSL Ethernet Router User’s Guide
Chapter
5
. The Configuration Screens in More Detail
63
1. Enable Security.
2. Create at least two different security interface types based on
existing LAN services.
3. Once you have created more than one security interface, the
NAT
column in the Security Interfaces table tells you that you can enable
NAT between the existing security interface and a network interface
type. For example, if you create an external interface and an
internal interface, your table will look like this:
4. The NAT column for the external interface tells you that you can
enable NAT to internal interfaces. If you also had a DMZ interface
configured, this column would also include an
Enable NAT to DMZ
interfaces
button. To enable NAT between the external
interface and
the internal interface type, click on
Enable NAT to internal interfaces
. The
Security
page is refreshed and NAT is enabled. To disable NAT between
these interfaces, click on
Disable NAT to internal interfaces
.
Once you have enabled NAT between interfaces, you can:
• configure global addresses.
• configure reserved mapping.
Configuring NAT global addresses
