Solwise SAR715PVW Setup Instructions Download

Page: 60 / 202

Chapter

. The Configuration Screens in More Detail

Solwise SAR715PVW ADSL Ethernet Router User’s Guide

This page allows you to add the IP address of a DNS Server to
DNS relay’s list of server IP addresses.

Type an IP address in the

DNS server IP address

text box. Click on

the

Apply

button.

The

Configure the DNS relay

button displays the configuration page

and allows you to disable or configure a new DNS relay address.

5.2.9 Security

This option allows you to configure Security, NAT and Firewall:

• Security - allows you to:

• enable Security.

• configure Security interfaces.

• configure triggers.

• NAT - allows you to:

• enable NAT between interfaces.

• configure global addresses.

• configure reserved mapping.

• Firewall - allows you to:

• enable Firewall and Firewall Intrusion Detection settings.

• set the Firewall security level.

• configure Firewall policies, portfilters and validators.

• configure Intrusion Detection settings.

• configure Alerting.

From the

Configuration

menu, click on

Security

. The following page is

displayed:

Summary of Contents for SAR715PVW











































































































































































































Search results

Summary of Contents for SAR715PVW

Reviews:

Related manuals for SAR715PVW

Brands by name

Popular brands

Solwise SAR715PVW, Setup Instructions

Search results

Summary of Contents for SAR715PVW

Reviews:

Related manuals for SAR715PVW

Brands by name

Popular brands