Overview
ADA102
CODER / DECODER
1.1
About this manual
Last revision: May 2022
Solidyne
®
All rights reserved.
No part of this document can
be copied or reproduced. All information is subject to change
without notice. All mentioned trademarks belong to their
respective owners and are used for reference only.
The exclamation icon within a triangle that appears in
this manual is intended to alert the user to the
presence of important instructions on the operation
and maintenance (servicing) of the equipment.
The pencil icon
that appears in this manual is to alert the
user to the presence of notes, suggestions and
examples about the operation.
1.2
What's in the box?
Inside the box you will find the following:
1 ADA102 Encoder / Decoder (rack module).-
1 AC power cord.-
1 crossed LAN cable
Printed user manual (this manual).-
Warranty certificate.-
Please check the items when receive it to verify that all
components are okay.
1.3
Features
The encoder/decoder
Solidyne ADA102
is a stand
alone
streaming
generator, designed to work as Studio
to Transmitter Link (STL). Encoder works with stereo
audio signals turning it into an MP3 or PCM audio
streaming, under different modes (see specifications).
The coded output is an RJ45 connector compatible
with Ethernet TCP/IP networks. ADA102 has
analogical audio inputs (balanced) and digital AES-3 or
S/PDIF.
At the other end, an ADA102 set as DECODER
convert the incoming stream (from Internet or
microwave link 802.11.x) into analogue audio signal or
a digital stereo AES-3 (S/PDIF compatible), sent to
transmitter.
Model ADA102mpx decoder incorporates a third type
of output: Baseband MPX for direct connection to a
broadcasting FM transmitter.
The unit has
four relay remotely managed
. At the
encoder, four inputs manages four switches on the
decoder, and vice versa.
The
USB port
lets you connect a pendrive when the
ADA102 works as a decoder. If the incoming streaming
drops, the ADA102 Decoder will start to play audio files
from USB device until the connection restored.
The
serial port
support "gateway". From studios,
using a computer connected to the ADA102 encoder,
you can command a remote device directly connected
to the ADA102 decoder at the transmitter plant, as if
the device was connected directly to the computer on
Studio.
Main features
•
Can be set as Encoder or Decoder by
settings, using the WEB Control Panel.
•
Generates
MP3 streams
at adjustable bit
rates (VBR) from analogue or digital (AES-3)
sources. Compressed audio is not supported
for full-duplex transmissions.
•
Generates
G.711
(aLaw/uLaw) streams at 8
or 48 KHz sample rate from an analogue
source.
•
Generates
PCM
(16 bit) streams from 8 up to
48KHz sample rate from an analogue
source.
•
Supports
Full-duplex
for PCM and G.711.
•
10/100 Mbit Ethernet connection supports
automatic network configuration (BOOTP,
DHCP, AutoIP and IPzator) as well as
manual static IP configuration.
•
Features
SonicIP®
announcing the IP
address on power up over the audio outputs.
•
Control and configuration using a standard
web browser.
•
Remote monitoring using SNMP.
•
Remote controllable using HTTP, TCP and
UDP.
•
4 inputs to manage 4 switches at the remote
device.
•
Serial port gateway.
•
In half-duplex the unit automatically
recognizes the audio format of incoming
streaming.
•
Balanced analogue inputs / outputs.
•
Base band MPX output for FM (optional).
•
USB Pen Drive for emergency audio. If the
streaming is lost due to network failure, the
decoder plays from USB device until
streaming restores.
SOLIDYNE
ADA102 CODER/DECODER
Page 4
Summary of Contents for ADA102
Page 1: ......
Page 2: ......
Page 10: ...SOLIDYNE ADA102 CODER DECODER Page 10...
