ADA102 only support .mp3 files. The USB drive must
contain the audio files placed directly in the root
folder, and a playlist file named
playlist.m3u
, which
determines the order in which the files will be played.
This playlist can be created using a simple text editor
(eg Windows Notepad) and then changing the
extension from .txt to .m3u. Example:
# sample playlist begin
audio1.mp3
audio2.mp3
audio3.mp3
audio4.mp3
# sample playlist end
As files are in the root folder, it is not necessary to
enter the path. Lines preceded by pound (#) are
comments.
Playlist can also be created using an audio player.
Usually create an .m3u only requires to save the list
of songs loaded on the player, as .m3u. playlist file.
Supported USB memory drives are detailed in
“1.2.4 – USB
port”
2.3
Alternative link modes
2.3.1 Half-duplex link with unknown IP
at the transmitter plant
In this case requires a half-duplex link between Studios
and Transmitter Plant. Studios have static IP but the
Transmitter IP is unknown. The decoder (Transmitter
Plant) will start the connection to the studios.
ADA102 at the Studios:
In the coder, go to “Configuration → Basic settings”
and set the streaming method as “Pull (BRTP)”, the
URL as “0.0.0.0” and enter the listening Port for BRTP.
Hit “Apply” to confirm the values.
ADA102 at the Transmitter Plant
At the Transmitter Plant, go to
“Configuration → Basic
settings”
and set
“Stream Method”
as
“Pull(BRTP)”.
In
field URL enter the IP address or URL of the CODER
in Studios. “Destination Port” must be the same
assigned in the CODER. Hit “Apply” to confirm.
2.3.2 Full-duplex link with unknown IP at
the Studios
This case is a full-duplex Studio to Transmitter link, but
only the Transmitter Plant IP is known. The coder at the
Studios starts the communication to that IP address.
ADA102 at the Studios:
In option
“Location”
set the device as “
Studio
Encoder/Decoder”.
Go to
“Configuration → Basic
settings”
and enter the IP address or URL for send and
receive.
Set the outgoing stream method as
“Push(RTP)”. In
URL enter the IP of decoder (the external IP address
that router redirects to ADA102 decoder at the
Transmitter Plant).
The Port number is the the
“Local
Port”
value assigned to the decoder in the Transmitter
Plant.
SOLIDYNE
ADA102 CODER/DECODER
Page 16
Summary of Contents for ADA102
Page 1: ......
Page 2: ......
Page 10: ...SOLIDYNE ADA102 CODER DECODER Page 10...
