Solidyne ADA102, Owner'S Manual, Page: 3 / 20

Table of contents
Overview.....................................................4
1.1 About this manual.................................................4
1.2 What's in the box?................................................4
1.3 Features................................................................4
Section 1 Hardware and connections.....5
1.1 General connection diagram.................5
1.2 Rear panel...............................................5
1.2.1 Power supply.....................................................5
1.2.2 Audio inputs and outputs...................................5
Balanced input/output connections:...................................5
Unbalanced connections:..................................................5
1.2.3 LAN port.............................................................6
1.2.4 USB port.............................................................6
1.2.5 Serial port...........................................................6
1.2.6 Remote control...................................................6
1.2.7 MPX output (optional ADA102mpx)...................6
1.2.8 Reset..................................................................6
1.3 Frontal panel..........................................7
1.3.1 Level indicators..................................................7
1.3.1.1 VU mode Tx/Rx.....................................................7
1.3.2 SATUS LED's...........................................................7
1.3.3 Headphones output............................................7
1.3.4 Input Gain..........................................................7
1.3.5 Output Gain........................................................7
1.4 STL connection diagram.......................8
1.4.1 Connection diagrams for streaming transport. . .8
1.4.2 Set the audio levels...........................................8
1.4.2.1 Audio processor locates at the studios with
analogical connections.......................................................8
1.4.2.2 Full digital connections..........................................9
1.4.2.3 Audio processor locates at transmission plant......9
1.4.3 Using an RF digital link......................................9
Section 2 software settings....................11
2.1 Setting up the ADA102 link.................11
2.1.1 Set ADA102 encoder.......................................11
2.1.2 Set ADA102 at the transmitter plant / receiving
studio (decoder)........................................................12
2.2 Advanced settings...............................13
2.2.1 Setting temporary IP address using ARP
command..................................................................13
2.2.3 Remote control.................................................14
2.2.4 Serial port.........................................................14
2.2.5 About audio settings........................................15
Encoding & Frequency................................................15
2.2.6 Calculating the bit rate.....................................15
2.2.7 Emergency pendrive........................................15
2.3 Alternative link modes.........................16
2.3.1 Half-duplex link with unknown IP at the
transmitter plant........................................................16
2.3.2 Full-duplex link with unknown IP at the Studios
..................................................................................16
2.3.3 Link with repeaters...........................................17
Section 3 Technical specifications........19
Digital Streaming Input / Output................................19
Other features...........................................................20
MPX output (modelo ADA102mpx)...........................20
SOLIDYNE ADA102 CODER/DECODER Page 3