DMS-1200 Release 6 Operations Manual
Section 4 – DMS-1200 Setup
35
b. If the BIU does not appear on the
Unassigned
list, click
Add
. Enter the BIU IP address. Then
click
Apply
.
3. Check the communication
Status
. Green indicates a working connection is established.
The system populates the BIU Name and Serial Number fields.
You can see the BIU topology (other DAS components connected to a particular BIU) by
clicking on the BIU hyperlinked name in the BIU field.
4
To delete a BIU from the Assigned list, click the red X in the Remove column.
5. To view the IP and Port settings for each BIU, click the
Remote Access
tab.
These settings can be edited from the
Network
>
System
menu. (See
Setting the DMS IP
Addresses
on page 28.)