DMS-1200 Release 6 Operations Manual
Section 2 – Hardware Installation
12
2
Hardware Installation
If the DMS server has already been installed as part of the DAS installation, skip to the next
section for
Log In and BIU Assignment
instructions.
The DAS management system server (DMS-1200) is typically mounted in the head end rack
above the ODUs and in close proximity to the BIUs. The server has an internal power supply and
requires standard 120-240V AC power. A power cable ships with the unit.
The DMS-1200 server requires 1U in a standard 19-inch equipment rack but should have 1U
above and below for air circulation.
SOLiD technicians configure and label the ALLIANCE DAS equipment prior to shipment. When
unpacking the equipment, note all labeling and inspect the hardware. Contact
SOLiD Support
if
the product is damaged.
In This Section
Required Materials
Installing the DMS Hardware
Connecting the DMS-1200 to the DAS
Connecting Multiple BIUs to the DMS-1200
Connecting to the DMS-1200