DMS-1200 Release 6 Operations Manual
Section 4 – DMS-1200 Setup
41
4.12 Managing Email Server Settings
For the DMS-1200 to send emails, you must first define settings for the email server on your
network.
1. On the
Network
menu, click
Email.
2. Click the
SMTP Server
tab.
3. Complete the information for the SMTP server according to these guidelines:
Column
Action / Status
SMTP Server
Enter IP address or DNS address of the server used for sending email.
Port
Enter the email server TCP port. Common SMTP ports include:
Port 25 = non-encrypted server using SMTP authentication.
Port 465 = secure SSL/TLS encryption server. SSL/TLS encryption is
started automatically before any SMTP level communication.
Port 587 = secure (TLS) using STARTTLS authentication. SSL/TLS
encryption may be started by STARTTLS command at SMTP level if
server supports it.
User Name /
Password
Enter a user name and password to receive email notifications.
From Name / Email
Enter sender name / email address to be displayed on / notification email.
Secure Connection
Enter any security protocol used on the email server.
Notification Period
Specify period to collect and transmit alarms generated: 2-60 minutes.
Table 4.11 – Email Server Setup
4. Click
Apply
when you are done. Changes are saved immediately.
5. To test the email feature, click
Test
. Enter a name and email address to receive the test
notification, then click
Send
.