background image

Copyright © Grass Valley, Inc. All rights reserved. Printed in the United States of America. Portions of software © 2000 – 2010, Microsoft Corporation. All rights reserved. This 

document may not be copied in whole or in part, or otherwise reproduced except as specifically permitted under U.S. copyright law, without the prior written consent of Grass 

Valley, Inc., P.O. Box 59900, Nevada City, California 95959-7900. This product may be covered by one or more U.S. and foreign patents.
Product options and specifications subject to change without notice. The information in this manual is furnished for informational use only, is subject to change without notice, 

and should not be construed as a commitment by Grass Valley, Inc. Grass Valley, Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in 

this publication.
Grass Valley, K2, Aurora, Summit, Dyno, Solo, Infinity, Turbo, Profile, Profile XP, NetCentral, NewsBrowse, NewsEdit, NewsQ, NewsShare, NewsQ Pro, and Media Manager 

are either registered trademarks or trademarks of Grass Valley, Inc. in the United States and/or other countries. Grass Valley, Inc. products are covered by U.S. and foreign 

patents, issued and pending. Additional information regarding Grass Valley, Inc. trademarks and other proprietary rights may be found at www.grassvalley.com. Other 

trademarks and logos used in this document are either registered trademarks or trademarks of the manufacturers or vendors of the associated products, such as Microsoft® 

Windows® operating system, Windows Media® player, Internet Explorer® internet browser, and SQL Server™. QuickTime and the QuickTime logo are trademarks or 

registered trademarks of Apple Computer, Inc., used under license therefrom.

K2 Summit Production Client, 

 

K2 Solo Media Server, and

 

K2 Summit SAN

 

Version 7.3.8 

 

Release Notes & Upgrade Instructions

These release notes contain the most recent information and supersede previous 

publications, as of 23 November 2010. Check the Grass Valley website at 

www.grassvalley.com/docs

 for an updated version that contains additional important 

information.

These release notes contain information for the following:

• K2 Summit models with internal storage
• K2 Summit models with direct-connect storage
• K2 Solo Media Server
• The K2 Storage Area Network (SAN) with connected shared storage K2 Summit 

Production Clients

Release 
Notes

Documentation path to install
K2 system with internal storage

System 
Guide

Quick Start 
Guide

Documentation path to install
K2 client with shared or direct-connect storage

Release 
Notes

System 
Guide

Quick Start 
Guide

SAN Manual
(shared storage)

*Cabling Guide packed with RAID primary chassis

*Cabling
 Guide

K2flxxxxx

xxxxxxxxxxxxxx

flxxxxx

flxxxxx

Grass Valley 

071-8781-00

Summary of Contents for K2 SOLO -













































































































Reviews: