© CASWA Pty Ltd – 2013
32 | Page
6
OPERATING LIFTLOG™XL
6.1
Operating Status
The Liftlog™XL is fitted with 3 LEDs labelled Power, Connected and Overload. These are visible from
the front of the unit.
Power LED :
Illuminates whenever power is applied to the unit.
Connected LED:
Flashes quickly while a GPRS/3G connection is being established.
Flashes every 3 seconds once connected.
Overload LED:
Illuminates for a couple of seconds on start-up.
Flashes briefly once a second at other times to indicate normal operation.
Illuminates continuously when either hoist exceeds it overload limit.
6.2
Accessing Your Data
Open a web browser (e.g. Internet Explorer) and type in the URL you have been given into the
address box. If you have not received a URL (web address) that can be used to connect to your
data, please contact
.
A screen similar to the following will appear, that reflects all cranes with Liftlog™XL devices installed,
for which you have access rights. If the individual pieces of equipment are not visible, click on the
icons on the left hand side to show the equipment belonging to that group (site, equipment class
etc).
