Sole Diesel 68 GTC, Operator'S Manual

Page: 56 / 82

Technical specifications
Solé Diesel, S.A. C-243 b, km 2 · 08760 Martorell (Barcelona) ·Tel. +34 93 775 14 00 · www.solediesel.com · info@solediesel.com 53
Operator’s Manual Marine Diesel Gensets
Section 8 – Technical Specifications
8 GTC
10 GTAC
7GSC
8 GSAC
11 GTC
14 GTAC
DIESEL ENGINE
G
en
era
l In
fo
rma
tio
n
Type Water-cooled, Diesel 4-stroke cycle
Direction of rotation Anti-clokwise observing genset from flywheel side
Nª. Of cylinders – arrangement 3- in line
Allowable Exhaust Back Pressure (KPa) Max- 6,57
Timing
Pushrod and rocker arm with gear driven camshaft in
crankcase
Bore (mm) 76 76 78
Stroke (mm) 70 70 92
Total displacement (c.c.) 952 952 1318
Compression ratio 23:1 23: 22:1
Ignition sequence 1-3-2
Adjusting
valve
Inlet
Open 18º BTDC 18º BTDC 15º BTDC
Close 46º ABDC 46º ABDC 41º ABDC
Exhaust
Open 46º BBDC 46º BBDC 54º BBDC
Close 18º ATDC 18º ATDC 10º ATDC
Inlet and exhaust valve clearance - cold
genset (mm)
0,25
RPM (rpm)
1500 (8 GTC)
1800 (10 GTAC)
1500 (7 GSC)
1800 (8 GSAC)
1500 (11
GTC)
1800 (14
GTAC)
Starting system Glow plugs
Lubric
atio
n
Sy
st
em
System description Forced lubrication by trochoid gear pump
Oil specification
Use oil with 15W40 viscosity and no less than ACEA
E5/E3 or API CH-4/SJ quality
Oil pump Trochoid gear type
Oil circuit capacity (l) 4,1 4,1 4,2
Min oil pressure - hot genset (MPa) 0,098 (1,0 kg/cm
2
)(0,98 bar)
Oil temperature – nominal speed (ºC) 60 - 95
Oil consumption (g/kW) 2,7 2,7 2,7
Fue
l Sy
st
em
System description
Coolant circulation controlled by centrifugal pump
with thermostatic control and heat exchanger. Cooled
exhaust manifold.
Fuel specifications ASTM diesel fuel No.2-D
Fuel injection pump In-line type
Fuel injection nozzle Throttle type
Co
olin
g
Sys
te
m
System description
Coolant circulation controlled by centrifugal pump
with thermostatic control and heat exchanger. Cooled
exhaust manifold.
Coolant specifications
KRAFFT ACU 2300 CC 50%
Coolant pumps Centrifugal type
Sea water pump Centrifugal type