Technical specifications
Solé, S.A. C-243 b, km 2 · 08760 Martorell (Barcelona) ·Tel. +34 93 775 14 00 · www.solediesel.com · [email protected]
51
Operator’s Manual Marine
generator sets
GENSET OVER-
HEATING
GENERAL
Compression weak
Check the compression.
6.3
Overload
Propeller too large, replace.
-
Incorrect injection time
Adjust the injection time of the injection pump.
LUBRICATION SYSTEM
Faulty oil pump
Contact with our dealer
-
Oil viscosity too high
Check oil specifications (oil used must be chosen according
to Technical Specifications).
6.4
Oil level too low
Restore the oil level. Inspect the genset for oil leaks.
6.4
COOLING SYSTEM
Faulty coolant pump
Check coolant pump (impeller, pump sealing).
6.6
Seawater cock clogged or restricted
Clean the cock, check the seawater pump impeller for
damage.
6.6
Faulty seawater pump
Check seawater pump (impeller, pump sealing).
6.6
Water cooler clogged
Clean the water cooler and the tube stack fitted in the heat
exchanger.
6.6
Coolant level low
Restore the coolant to normal operating level.
6.6
Thermostat inoperative
Replace the thermostat.
6.6
INLET
AND
EXHAUST
SYSTEM
Air filter clogged
Replace air filter.
6.7
LOW OIL
PRESSURE
LUBRICATION SYSTEM
Faulty oil pump
Contact with our dealer
-
Oil pressure relief valve sticking
6.4
Oil pressure too low
Check oil level.
6.4
Oil level too low
Restore the oil level. Inspect the genset for oil leaks.
6.4
Faulty oil pressure valve
Contact with our dealer
-
Faulty oil pressure gauge or switch
Check and/or replace oil pressure switch.
6.4
NOISY GENSET
GENERAL
Compression weak
Check the compression.
6.3
Overload
Reduce the electrical load.
6.3
Exhaust system leak
Inspect the exhaust system. Replace the inoperative
exhaust system components.
6.3
Vibration excessive
Tighten all loose nuts and bolts.
6.3
Valve clearance incorrect
Adjust the valves.
6.3
Summary of Contents for 68 GTC
