25
Control Keypad
________________________________________________________________________________________
7.
CONTROL KEYPAD
The control keypad is the link between the Soft Starter and the user.
The RVS-DXM control keypad features:
(1) Two lines of 16 alphanumeric characters each (with five selectable languages
±
English,
French, German, Spanish and Turkish)
(2) Six push-buttons (
Mode
,
Reset
,
Select
,
Store
, Up (
Ÿ
) and down (
ź
) keys).
(3) Four indication LEDs (
On
,
Ramp
,
Run
and
Fault
)
Close
view
7.1
LCD Arrangement
CURRENT LIMIT
390%
Upper line displays function.
Lower line displays setting and\or measured values.
7.2
Push-buttons
Mode
Scrolls through the display and programming menus of the RVS-DXM.
Note
: Pressing
Mode
continuously increases the speed at which the parameters change.
Select
When a mode name is displayed, pressing this button drills down to the parameters for that
mode. When a parameter is displayed, pressing this button scrolls to the next parameter.
Ÿ
Allows the operator to increment adjusted values shown in the display. Operator should press
this button once to increment one value, or continuously to rapidly increment values up to the
maximum value.
ź
Allows the operator to decrement adjusted values shown in the display. Operator should press
this button once to decrement one value, or continuously to rapidly decrement values up to the
minimum value.
Store
Stores modified parameters
only
when you have scrolled through all parameters and STORE
ENABLE XXXXXX PARAMETERS is displayed. After you store a parameter successfully DATA
SAVED OK will display.
Note
: Pressing this button at any other time has no effect.
Reset
Resets the RVS-DXM after a fault has been dealt with
and
the start command has been
removed. This cancels the fault displayed and allows you to restart the motor.
(2)
(3)
(1)
