Status, Warnings and Errors
The BMS-EX is equipped with an onboard diagnostics system. The system will trigger warnings
and errors when one or more battery parameters nears or exceeds the operational limit of the
cells, cables or the BMS itself.
Warnings and errors are displayed in two ways:
-
Events: The BMS generates and stores events when settings are changed or when
warnings or errors are triggered. These events are stored in the BMS and sent to the connected
data logger. For each event generated a freeze frame is stored showing the exact battery
conditions (such as serial number, date and time, voltages, current, capacity and temperature)
at the time of the event.
-
Indication LEDs: the BMS uses the indication LEDs on the board as well as the LEDs in
the Multifunction push button to display warnings and errors.
Status and Indication LEDs
Figure 15: LEDs
The Status LEDs determine what the indication LEDs will show.
1.
If the Status LED is Green the indication LEDs can show either:
a.
Battery capacity
b.
Current flow and direction
c.
Off
28
Summary of Contents for SS4143-11
