Solar MD SS4143-11, Installation Manual

Page: 18 / 55

Example: Navigating the sub menu to change BMS operation from Standalone mode to High
Voltage mode.
Visual Representation Description
Step 1 - Press and hold until the 4th LED starts
blinking (the LEDs will blink sequentially from
left to right starting at LED 1).
- Long press the button to enter into the sub
menu.
Step 2 You are now in the Sub menu
- Quick press to navigate the sub menu until
the 1st indication LED is blinking to enter the
operation mode (parameter 1 of the sub
menu).
- Long press to enter into the operation mode
setting.
- The CANBUS 1, 2 and RS485 LEDs will now
start blinking, showing the current settings for
the specific parameter.
(it's currently showing Standalone mode)
Step 3 - Quick press to navigate to production high
voltage mode.
- Long press to save the setting.
- All done! Leave the button for 20 seconds or
long for it to go back to its home screen
17