Solar MD SS4143-11, Installation Manual

Page: 40 / 55

1. Information on this document
1.1. General Information
This document describes how to use Solar MD battery EX series in combination with
Inverters/Chargers. As of firmware version 171 BMS-EX from Solar MD supports direct
control of Inverters connected via CANBUS.
This document must be used in conjunction with document:
BMS-EX_Manual_CV_en1.1
Further guidance can be found via our Youtube video:
https://youtu.be/bLXR5Mm4Kjg
2. Supported Inverters
Battery parameter ‘’Inverter type’’ can be set via the LoggerV or by using the battery
multifunction push button.
When using the multi function push button navigate to Sub Menu (Parameter 4), then
Sub Parameter 3 (Inverter type) and select a value from:
● 1 - None: function reserved
● 2 - SMA
● 3 - Victron
● 4 - Sunsynk
● 5 - Goodwe
Refer to the LoggerV manual and the BMS EX manual for information on how to
configure the Battery for a specific inverter.
2.1. SMA
Full Support of proprietary “SMA inverter protocol”.
2.2. Victron
Full support of All GX related devices.
2.3. Sunsynk / Deye
Full support of all DEYE related inverters using DEYE CAN Protocol.
2.4. Goodwe
Full support of All Goodwe low voltage inverter using proprietary Goodwe Protocol
39