4.5.5 Module Replacement Screen
From the main screen, press the F4 button nine times until the module replacement screen is displayed, as shown in
Figure 67
�
Figure 67: Module replacement screen
The module replacement screen displays the procedures for replacing all user replaceable module assemblies in the UPS
frame�
To view the procedure, press the F5 button to enter the module replacement� One module option is highlighted� Press
the F3 or F4 button to navigate to the specific module procedures, and then press the F5 button to view the procedures�
Once completed, press the F2 button to exit�
4.5.6 Prompt Window
During system operation, occasionally the UPS system needs to alert or remind the user of alarm notifications or require
the user to confirm a command or perform other operations� When this occurs, a prompt window will pop up, as shown
in
Figure 68
� Refer to
Table 23
below for possible prompts and the descriptions/actions to be taken�
Figure 68: Example of prompt window
Battery
SolaHD S5KC Series
2013- 08-01
10:45:20
▲
▲
▲
LC board
Bypass monitor board
Bypass control board
power module
battery module
charger module
ESC
Module Replacement Screen
Battery
SolaHD S5KC Series
2013- 08-01
10:45:20
▲
▲
▲
1. remove large plastic bezel
2. lift up user interface module
3. replace user interface module
4. insert user interface module
5. replace large plastic bezel
ESC
LCD Board Replacement Procedures
58 | 4�0
OPERATION AND DISPLAY PANEL
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
