3.6 MultiLink®
MultiLink monitors the UPS continuously and can shut down configured computers in the event of an extended power
failure� MultiLink can also be configured to shut down the UPS� MultiLink can also be configured for use without the USB
cable when the IntelliSlot® UNITY-DP SNMP Card is installed in the UPS� An optional MultiLink License Kit permits shutting
down the UPS over a network� For more information about the IntelliSlot SNMP Card, IntelliSlot Web Card and MultiLink
license kits, visit
Sola Hevi Duty website
or contact your local representative�
3.7 LCD Port
The LCD module contains the LCD port, which is used for power and data communication between the UPS monitor
module and display module� The LCD module can be removed from the SolaHD S5KC and remotely located� A longer
Ethernet cable must be used when installing the LCD module remotely� A standard Ethernet (Category 5, with RJ-45
connectors, both ends meet T568B standard) type cable can be used� Maximum cable length is 14 meters to ensure
proper communication signals between the UPS and the LCD module�
The user interface module provides three network ports and one USB port� Of those, one network port (LCD port) is used
for power supply and communication of the user interface module� Other network ports and the USB port are reserved
for use only by customer service personnel�
Figure 50: LCD port
LCD Port
User Interface
Module
S5KC SERIES USER MANUAL | 43
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
