socomec MASTERYS IP+ 60, Installation And Operating Manual

Page: 42 / 60

1
MASTERYS IP+
60-80 kVA 3/3
IT
ALIANO
ENGLISH
42
IOMMASIPXX08-GB 02
COMMUNICATION
9
9.2.2.8 Confi guring e-mail.
This menu lets the user confi gure pa-
rameters for sending e-mails.
•
Event that will send an e-mail : as
required, the e-mail may be deacti-
vated or activated to send a message
in the event of serious alarms or for all
alarm conditions.
• E-mail server address : insert the IP
address (xxx.xxx.xxx.xxx) of the SMTP
e-mail server from which you wish to
send messages.
• e-mail account : Insert the UPS’s
dedicated “user account”, which is
often the same as the user’s e-mail
address.
• Addressee : insert the e-mail address to which the alarm messages will be sent.
• Periodic connection : set the frequency at which an e-mail is to be sent to verify the connection.
• Force an e-mail to be sent now : by selecting “execute” a test e-mail will be sent.
9.2.2.9 Modem confi guration.
This menu lets the user confi gure the
parameters of a modem
•
Rings before reply: Set the number
of rings after which the modem should
respond.
• Outgoing call 1 : sets the type of
outgoing call: SMS or E- service (to
activate e-service a contract to the
support centre is required).
• Reason for callout : set the reasons
for the call (all alarms or for serious
faults).
• Installation : text string used to
describe the UPS installation site,
which is useful if there are more
than one unit connected (this value
is inserted in SMS messages or e-mails).
• Telephone number : insert the number to be called.
• Modem initialisation : initial string to be sent to the modem (for special confi gurations or certain types of modem).
• Connection period : set the number of days between two calls even if no faults occur.
• Force an outgoing call : by selecting EXECUTE a test connection is immediately carried out.
1 Activating one confi guration excludes the other; therefore if an E-service/T-service contract is subscribed, calls in output cannot be confi gured.
2 In the event that the E-service/T-service contains the control code provided by after-sales personnel.