MASTERYS IP+
60-80 kVA 3/3
IT
ALIANO
ENGLISH
32
IOMMASIPXX08-GB 02
8.4 “PARAMETERS” MENU
Displays only the confi guration parameters set for the UPS.
The messages in this menu are identifi ed by an asterisk in the confi gurations service menu.
The parameters can only be changed by entering the service / confi gurations menu.
CURRENT DATA menu
Message Description
SINOTTICO
Identifi e the size, the phases confi guation input and output and the serial number
SN.
0000000000
of
the
UPS.
FW.
X.XX
CKS. XXXX
LAN SINOTTICO MAC ADDRESS
Identifi e the mac addres of LAN PCB.
XX . XX .
XX . XX . XX . XX
FW X.XX
SCHEDA DIGITALE
Identifi e the micro prosessor software version.
UP RV 000 CKS: 0000
Identifi e the mac addres of LAN PCB.
DSP RV
000 CKS: 0000
8.5 “SERVICE” MENU.
This is used to change the confi guration parameters, insert the warranty activation code and display the service
code.
8.5.1 “Activation code” menu.
During activation of the equipment a warranty activation code, made up of four characters, is requested to com-
plete the start-up procedure.
MANUFACTURER WARRANTY VALI-
DATION
PLEASE INSERT THE CODE
The activation code is provided directly by the reference Support Centre upon communication of the serial number
of the equipment which is displayed in the next message by pressing
ENTER
.
SEE INSTALLATION MANUAL
FOR PROCEDURE
SN: 0000000000
When contact is made with the Support Centre for the activation code, detailed information can be obtained on the
UPS functions available and on the periodic preventive maintenance programmes.
MENU
8
Summary of Contents for MASTERYS IP+ 60
