socomec Masterys Green Power, Installation And Operating Manual, Page: 49 / 62

ENGLISH
IOMMASGPXX01-GB_01
49
10-40 kVA
COMMUNICATION
8
8.2.2.9
.PEFNDPOöHVSBUJPO
.
This menu lets the user configure the parameters of a modem
r
Rings before reply: Set the number of rings after which the modem should respond.
r Outgoing call 1 : sets the type of outgoing call: SMS or E- service (to activate e-service a contract to the support
centre is required).
r Reason for callout : set the reasons for the call (all alarms or for serious faults).
r Installation : text string used to describe the UPS installation site, which is useful if there are more than one unit
connected (this value is inserted in SMS messages or e-mails).
r Telephone number : insert the number to be called.
r Modem initialisation : initial string to be sent to the modem (for special configurations or certain types of mo-
dem).
r
Connection period : set the number of days between two calls even if no faults occur.
r
Force an outgoing call : by selecting EXECUTE a test connection is immediately carried out.
"DUJWBUJOHPOFDPOñHVSBUJPOFYDMVEFTUIFPUIFSUIFSFGPSFJGBO&TFSWJDF5TFSWJDFDPOUSBDUJTTVCTDSJCFEDBMMTJOPVUQVUDBOOPUCFDPOñHVSFE
2 In the event that the E-service/T-service contains the control code provided by after-sales personnel.
8.2.2.10 Software updating.
This html page is used to update automatically the monitoring software, which could be useful to add new languages
or the SNMP function.
Once the file has been acquired (by requesting it from the support service) select it with the browse button.
$MJDLPOUIFiTUBSUVQEBUFuCVUUPOPODFUIFVQEBUFIBTCFFODPNQMFUFESFMPBEUIFIUNMQBHF
8.2.2.11 System Information Area.
This area of the screen page shows
the measurements and the UPS op-
erating mode.
r $MJDLPOJDPO
A to display the input
measurements.
r $MJDLPOJDPO
B to display the bat-
tery measurements.
r $MJDLPOJDPO C or D to display the
output measurements.
A
C
B
D