ENGLISH
IOMMASGPXX01-GB_01
37
10-40 kVA
6.1.3.4 “Parameters” menu.
Displays only the configuration parameters set for the UPS.
The messages in this menu are identified by an asterisk in the configurations service menu.
The parameters can only be changed by entering the service / configurations menu.
CURRENT DATA menu
Message Description
SINOTTICO
Identifie the size, the phases configuation input and output and the serial number
SN. 0000000000
of the UPS.
FW. X.XX CKS. XXXX
LAN SINOTTICO MAC ADDRESS
Identifie the mac addres of LAN PCB.
XX . XX . XX . XX . XX . XX
FW X.XX
SCHEDA DIGITALE
Identifie the micro prosessor software version.
UP RV 000 CKS: 0000
Identifie the mac addres of LAN PCB.
DSP RV 000 CKS: 0000
MIMIC PANEL
6
An error message is displayed if the code is incorrect. Check that the code displayed corresponds to the one pro-
vided by the Support Centre and repeat the procedure.
SEE INSTALLATION MANUAL
FOR PROCEDURE
CODE = - - - - **
6.1.3.5 “Service” menu.
This is used to change the configuration parameters, insert the warranty activation code and display the service code.
“Activation code” menu.
During activation of the equipment a warranty activation code, made up of four characters, is requested to com-
plete the start-up procedure.
The activation code is provided directly by the reference Support Centre upon communication of the serial number
MANUFACTURER WARRANTY
VALIDATION
PLEASE INSERT THE CODE
of the equipment which is displayed in the next message by pressing
ENTER
.
Inserting the code does not limit the availability of the equipment’s functionality.
SEE INSTALLATION MANUAL
FOR PROCEDURE
SN: 0000000000
When contact is made with the Support Centre for the activation code, detailed information can be obtained on the
UPS functions available and on the periodic preventive maintenance programmes.
Once the code is obtained, enter it by pressing
ENTER
to activate the entry (two asterisks will appear). Select the
first character with the
UP
and
DOWN
keys and confirm with
ENTER
to accept the character. Then move
on to the next character. Pressing the
ENTER
key after selecting the fourth character activates code.
Summary of Contents for Masterys Green Power
Page 1: ...INSTALLATION AND OPERATING MANUAL IOMMASGPXX01 GB_01 10 40 kVA...
Page 2: ...ITALIANO...
Page 62: ......
