Lit. No. 89451, Rev. 05
64
May 15, 2022
OPERATING YOUR SNOWPLOW
TRANSPORTING SNOWPLOW
NOTE: For HDV™ blades, use care when
driving or entering driveways with the
snowplow in the retracted (vee) position. The
outer ends of the cutting edges could contact
the ground.
WARNING
Position the blade so it does not block
headlamp beams.
Do not change blade position while
traveling. You could suddenly lower the
blade accidentally.
CAUTION
Transport speed should not exceed
45 mph (72 km/h). Further reduce speed
under adverse travel conditions.
NOTE: Always transport the
POWER PLOW™ snowplow with both wings
fully retracted.
1. Completely raise the blade.
2. Adjust the blade height for maximum
snowplow headlamp illumination.
3. Adjust the blade to the straight position.
4. Turn the control OFF to lock the blade in place.
NOTE: Overheating is unlikely under normal
driving conditions, but occasionally the
snowplow may be positioned where it deflects
air away from the radiator. If this occurs,
stop the vehicle and raise, lower, or angle the
snowplow slightly to correct overheating.
NOTE: Only the driver should be in the vehicle
cab when the snowplow is attached.
Summary of Contents for 6800LT
Page 3: ......
