Lit. No. 89451, Rev. 05
55
May 15, 2022
OPERATING YOUR SNOWPLOW
Straight Blade Option
The wings may be pinned in position to operate as
a straight blade, using the hardware provided:
1. Fully angle the blade to one side. Lower the
blade and turn the plow control and vehicle
ignition OFF.
2. Standing behind the blade, install a
3/4" x 9" (1.9 cm x 23 cm) clevis pin down
through the holes in the back of the blade
assembly, as shown.
3. Secure the pin with a 1/8" (3 mm) hairpin
cotter.
4. Repeat Steps 1–3 on the opposite side.
1/8" Hairpin
Cotter
3/4" x 9" Clevis Pin
Summary of Contents for 6800LT
Page 3: ......
