Lit. No. 89451, Rev. 05
77
May 15, 2022
• Make sure that all electrical connections,
including grounds, are clean, tight, free of rust
or corrosion, and coated with dielectric grease.
•
Check all plugs and seals for hydraulic fluid
leaks. Repair as necessary.
• Lubricate all moving parts. Not doing so will
make operation of the mount difficult and
possibly damage components.
For HDV™
V-plows,
also see "Greasing HDV Pivot Pin
Hinge" later in this section.
•
SPEEDWING™ Wing Cutting Edges:
To
equalize wear, follow the procedures described
in the following "Cutting Edge Wear and
Leveling Adjustment" section.
MAINTENANCE AND ADJUSTMENT
Your SnowEx
®
snowplow is designed for rugged,
dependable service. However, like the vehicle
on which it is mounted, it needs regular care and
maintenance.
Check the following before and frequently during
the plowing season:
• Make sure that all fasteners, mounting bolts,
and hydraulic connections are tight.
MAINTENANCE
WARNING
Lower the blade when the vehicle is
parked. Keep 8' (2.4 m) clear of the blade.
Temperature changes could change
hydraulic pressure, causing the blade to
drop unexpectedly or damaging hydraulic
components. Failure to do this could
result in serious personal injury.
Summary of Contents for 6800LT
Page 3: ......