Lit. No. 89451, Rev. 05
44
May 15, 2022
OPERATING YOUR SNOWPLOW
Control Functions
RAISE, LOWER, FLOAT, Angle
Moving the control lever straight up and down or
from side to side on the control body will result in
the blade movements described in the following
tables.
FLOAT Light
(green)
Function Description of Operation
RAISE
Move the control lever toward the top of
the control body to raise the blade and
cancel the FLOAT mode.
LOWER
Move the control lever toward the bottom
of the control body to lower the blade.
Release the lever to stop the blade at the
desired height.
FLOAT
†
Move the control lever to the
LOWER
position and hold 3/4 second to activate
this mode. The FLOAT light in the upper
right corner of the control face will
illuminate. The blade will lower to the
ground surface and follow the contour of
the surface as it dips or raises. Function
does not time out; however, control will
shut down after 20 minutes of nonuse.
Move lever to the
RAISE
position
momentarily to cancel FLOAT. Angling
left or right will not interrupt (pause) the
FLOAT function.
†
FLOAT mode activates immediately when one‑touch FLOAT
feature is enabled. See "One‑Touch FLOAT" in this section
for more information.
Summary of Contents for 6800LT
Page 3: ......
