Lit. No. 89451, Rev. 05
81
May 15, 2022
HYDRAULIC SYSTEM
Fluid Level
NOTE: On POWER PLOW™ and HDV™ blades,
add fluid only when wings are retracted.
NOTE: Remove fill plug slowly to relieve any
pressure in reservoir.
MAINTENANCE
CAUTION
Do not mix different kinds of hydraulic
fluid. Some fluids are not compatible and
may cause performance problems and
product damage.
1. With the Automatixx
®
system attached to the
vehicle, lower the blade to the ground. Turn
the control OFF.
2. Remove the hydraulic cover.
3.
Slowly remove the fill plug to check or add fluid.
SPEEDWING™, POWER PLOW™, and
Straight Blades:
Fluid level should be 2" to
3" (5 to 8 cm) below the top of the fill pipe.
HDV™ Blades:
Fluid should be 1" to
1-1/2" (2.5 to 3.8 cm) below the fill pipe.
Do not overfill. Replace the fill plug.
4. Replace the hydraulic unit cover.
For fluid recommendations see "Annual Fluid
Change" in this section.
Summary of Contents for 6800LT
Page 3: ......
