Lit. No. 89451, Rev. 05
71
May 15, 2022
4. Push and hold power switch RIGHT and push
and hold attach/detach operation switch LEFT
to rotate headgear down until stand contacts
ground (POWER PLOW™, SPEEDWING™,
or straight blade snowplow) or headgear
contacts T‑frame (HDV™ snowplow) and
hydraulic unit turns OFF.
5. Unplug electrical harnesses.
NOTE: After each use of the snowplow,
reapply dielectric grease to the electrical
plugs to maintain the protective coating on
the terminals.
NOTE: Reinstall plug covers on harnesses.
DETACHING SNOWPLOW FROM VEHICLE & STORAGE
3. Hold down lock lever to disengage lock pin
and move hitch pin handle rearward into notch
in end of slot to fully disengage hitch pins from
receivers.
Lock
Lever
Lock
Pin
Lock Pin
Bracket
Hitch
Pin
Handle
Summary of Contents for 6800LT
Page 3: ......
