Lit. No. 89451, Rev. 05
69
May 15, 2022
OPERATING YOUR SNOWPLOW
Clearing Parking Lots
1.
Clear areas in front of buildings first. With the
blade raised, drive up to the building. Drop the
blade and back drag the snow away from the
building. When snow is clear of the buildings,
turn the vehicle around and push snow away
from the buildings toward the outer edges of
the lot.
2. Plow a single path down the center in the
lengthwise direction.
3. With the blade in the scoop, angle, or windrow
position, plow successive strips lengthwise
until the area is cleared and snow is stacked
around the outer edges.
4. If snow is too deep to clear in the above
manner, clear the main traffic lanes as much
as possible.
PARKING WITH SNOWPLOW
ATTACHED
Whenever you park your vehicle, completely lower
the blade to the ground.
TOWING A DISABLED OR STUCK
VEHICLE
WARNING
Lower the blade when the vehicle is
parked. Keep 8' (2.4 m) clear of the blade.
Temperature changes could change
hydraulic pressure, causing the blade to
drop unexpectedly or damaging hydraulic
components. Failure to do this could
result in serious personal injury.
CAUTION
Do not use any snowplow or mount
components as an attachment point when
retrieving, towing, or winching a disabled
or stuck vehicle.
Summary of Contents for 6800LT
Page 3: ......
