Snom 00004257 Page 87 User Manual Download | Manualshive

Page: 87 / 98

background image

87

D315 | D305 User Manual

Appendix 2

A

ppendix 2 - Status Messages

Whenever there is a current message concerning the status of the phone, the function key

will be

available. Press the function key or, if it not available,

or

> 6 Information > 1 Status Info) to open

the "Status info" screen. Additionally, some status messages will also be displayed in the status bar; if there is
more than one current message, the one with the highest priority will be shown. The messages in descending
order of priority:

Status message

Definition

SW 1

A firmware update is available

Reboot required 1

Reboot required, for example to have settings changes take
effect

SIP disabled 1,²

The phone cannot make calls due to license problems

Error 1

An error occurred

Low memory 1

Disk space full

Remote directory is too big 1

The remote directory is too big to be imported

Not Registered:

<account>

1,²

The specified identity/account is not registered

Waiting for

<name/number>

to be

available

²

Waiting for call completion to busy or currently unavailable
number

<account>

is now available

²

The dialed number is not busy anymore or is now available

Forward when Busy:

<name/number>

Call forwarding is on. When your phone is busy, incoming
calls will be forwarded to the phone number indicated

Forward after Timeout:

<name/number>

Call forwarding is on. When an incoming call is not picked up
within the set number of seconds, the call will be forwarded
to the phone number indicated

Forward all:

<name/number>

²

Forwarding of all incoming calls is on. All incoming calls will
be forwarded to the phone number indicated.

Contacting NTP server

Network Time Protocol (NTP) is a protocol for synchronizing
clocks over data network. If the connection is interrupted,
the phone will not be able to display the correct time.

NTP server unreachable 1

HTTP Password not set 1

No HTTP password has been set

Admin Password not set 1

No Admin password has been set

Keyboard locked ²

Only numbers designated as emergency numbers can be
dialled

DND active ²

Do not Disturb mode is activated

You have messages

There are spoken messages on the mailbox

You have new messages

New (messages on the mailbox)

Old messages

Old (messages on the mailbox)

Missed:

<number>

The number of calls you missed since the last time you
checked the list of missed calls or turned off the missed call
indication

1 The function key symbol

will blink

² The message cannot be deleted from the "Status Info" screen

«
...
85
86
87
88
89
...
»

Summary of Contents for 00004257



































































































Reviews:

No comments

Related manuals for 00004257

Brand: Yealink Pages: 6

Brand: Yealink Pages: 8

Brand: SAIET Pages: 49

Brand: Amplicomms Pages: 90

Brand: Doogee Pages: 39

Brand: 3Skypephone Pages: 36

Brand: Sony Ericsson Pages: 80

Brand: Samsung Pages: 145

Brand: Samsung Pages: 125

Brand: Samsung Pages: 156

Brand: Samsung Pages: 78

Brand: Zte Pages: 256

Brand: Allworx Pages: 22

Brand: Acer Pages: 32

Liquid Mini E310

Brand: Acer Pages: 63

CloudMobile S500

Brand: Acer Pages: 66

Brand: Acer Pages: 58

Brand: Acer Pages: 76

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands