![background image](http://html.mh-extra.com/html/snell-and-wilcox/nrs70/nrs70_operators-manual_1309059028.webp)
NRS70 Series
SECTION 4
NRS70OPS
070803 Version 1 Issue 2
www.snellwilcox.com
4.4
Pressing the button adjacent to the required item
allows a connection to be made.
◀
NRS70
A connection may be made to a NRS70 and then
controlled from this unit’s front panel (soft and hard
button control).
◀
NRS70TX
A connection may be made to a NRS70TX and
then controlled from this NRS70 front panel (soft
and hard button control).
◀
Another module/unit
Other modules or units on the network may be
connected to in the same way.
For more details on the RollCall operating network
please consult the operating manual for IQ
Modular Shoebox.
The symbols used are shown below:
This symbol represents a gateway to a
module.
This indicates that the unit is currently
connected to this control panel. Pressing
the adjacent button will disconnect the unit
from the control panel.
This indicates that this unit is currently
connected to and locked by another control
panel.
This shows that the unit is in the standby
mode (i.e. currently not active but locked
by this control panel).
This represents a bridge connection.
This indicates that a connection has been
already made to this unit but the unit will
still accept another connection.
The RollCall network may also be browsed by
using the RollCall Control Templates as described
on page 4.27.